Acrylic Turntable AMP audio receiver record player Dust Covers OEM Thorens, Clear Audio, Kenwood, Panasonic, Marantz, McIntosh, SME, Garrard, VPI, Pro Ject, United Audio Duel, Eat C Sharp.

We produce Clear Acrylic turntable dust covers that can be produced from 1/8", 3/16", and 1/4" thick clear acrylic. We can produce a custom turntable cover if you had purchased or built a custom box unit. Many of our covers are full unit cover rather then OEM top covers. Which gives many sizes we have produced a size we are sure will fit what you need.

When filling out our form please be sure to "check on" inside or outside dimensions as well as zip code for a shipping cost.

Dust Covers we have produced for many new high end and old school turntables such as Thornes, McIntosh, Marantz, Panisonic, Linn, Clearaudio, Rega, VPI, and many more.

Left and Right side handles 1"High x 4"Long $14..00

Rear Cord cut-out small 1" x 1" $6.00

Rear cut out from 1"-2" High to 8"-10" Long $15.00

Our turntable covers are produced from 3 pieces of clear acrylic.

1st piece is to construct the main body which is the front, top, and back.

Top front and rear 2 edges are a formed radius edge.

2nd & 3rd pieces are for the left and right sides.

We then route off excess material after bonding and polish all edges.

All handles and rear cut-outs are added before forming and bonding.

HOW THEY ARE PRODUCED

MAX shipping size is 22"Wide x 20"Deep x 12"High

Please click on either form below that best describes the rear of your cover with cut-outs needed for cords to pass through.

Simply print of the form and add all needed dimensions.

You can then scan, fax, E-mail PDF or JPEG to JMK Displays for production.

This form is not needed for just a quote. The form below will be enough information to quote your cover. When an order is placed we will need the proper form filled out for production unless no cut-outs are needed.